03-17-2004 04:53 PM - edited 03-17-2019 08:11 PM
Hi,
Can somebody help me design the best way to configure qos in the following scenario? and where to apply the qos policy?
Central office:
2600xm router and Polycom video conference device
Remotes:
2600xm router and Polycom
Note: The remotes are connected using a ipsec tunnel from pix to pix and the 2600xm is in the inside doing GRE to the main router which is a 3660 which is connected via a ptop t1 to the location where the other 2600xm is.(2600>pix>pix>3660>2600).
Thanks very much,
Uriel.
03-23-2004 11:04 AM
I think this documents give a good idea about the QoS requirement in a video deployment .
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_example09186a0080111c1b.shtml
For more information read the related topics
03-23-2004 07:11 PM
Yes, I saw it and I'm using a similar configuration; thanks for the hint.
Regards,
Uriel.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide