Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a 1841 router and I'm trying to see the user name when he fails to login to the router; I have the following configuration and when I do a show log; I see the failed attempts but do not see the user who failed:login block-for 60 attempts 3 ...
Hi,My name is Uriel and I have this issue:We moved remote sites from Frame Relay to IPSEC between ASA 5510(Hub Site) and 1841(Remote Site)and everything works fine except that major applications when are left unattended they drop and the users need t...
Gentleman,I have the following scenario:PtoP link between main site and branch.(2620 and 1721 routers)two ASA at each site and IPSEC tunnel.Each site has its own internet access and would like to be able to route internet traffic if the main site or ...
Hi,For some reason I can not access the 340 bridge through the console cable. I'm using a straight through cable and my hyperterminal settings are 9600,8,none,1,xon/xoff and I can not get the menu. If I connect to another 340, this still does not wor...
Hi,I have the following escenario and I'm having some issues getting calls to most of the offices; the strange part it that the calls work for about 4 out of the 18 locations and they're all configured the same; here is the equipment I'm using:Cisco ...
Hi Rick,No I did not configure IRB all I'm doing is bridging since we can not implement routing in this scenario due to application constraints so the LAN subnet needs to be the same at both ends of the two routers.Thanks,Uriel.
Rick,I have a similar scenario but the only issue is that I can not ping between the two routers doing the bridging over the ppp connection. do you happen to know why? here is what I have:Router 1:interface FastEthernet0 ip address 172.16.4.253 255.2...
