05-13-2013 07:43 AM - edited 03-18-2019 01:06 AM
I noticed for endpoints (MX300) running TC v6.0.1 & 6.1.1 and registered on a CUCM V8.6, that the SIP URI field is erased when a 'Apply Configuration' is done on these endpoints.
Once this is the cas ethe endpoint does not register anymore on the CUCM and the URI filed needs to be entered manually on the endpoint.
Did someone experienced the same?
rgds, Geert.
05-13-2013 09:56 AM
I've got some SX and EX running with 6.0 and 6.1 with CUCM 8.6.2 and it is working fine. If you apply the config, the URI will be reset to something like 12345@CUCMIP.
Sent from Cisco Technical Support iPhone App
04-15-2014 10:27 PM
I had the same issue and I opened a cisco tac case. The cisco tac support guy said the following...
"I found a relevant bug here: CSCub72167 : 9.0(1)/8.6(2) Support files for Cisco TelePresence models. The workaround mentioned in this bug is For 8.6 versions without this fix (everything before 8.6.2su3) re-apply the devpack to enable tandberg endpoints. The devpack correctly updates database so that signed config files are produced and served."
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide