SX10 with 802.1x

[Manuel Gansch]

I have a sx10 (TC7.1.1 or TC7.1.3 or TC7.1.4 it is the same problem with each SW Release)  codec and want to use 802.1x for network authentication but this isn´t working.

I configured the user name for the authentication in the Identity field of the sx10 codec. But the sx10 isn´t sending this value.

The codec uses it´s own mac adress for authentication and not the value of the Identity field.

When i use the same configuration with an sx20 (TC7.1.1) codec everything is working fine.

Is there a problem with the sx10 and 802.1x?

Best regards

Manuel

[Marco Hornung]

Hi Manuel,

we have the same issue.

There is a new Software available, 7.2

http://software.cisco.com/download/release.html?mdfid=286242547&flowid=50108&softwareid=280886992&release=TC7.1.4&relind=AVAILABLE&rellifecycle=&reltype=latest

I think, there is a problem with the sx10 and 802.1X. We use the same settings as in Cisco TelePresence Profile 52/55 Dual but the sx10 doesn´t respond to the eap packets of the switch.

[Manuel Gansch]

Hi Marco,

i got TC7.2 BETA from TAC, with this software 802.1x is working.