06-27-2013 08:37 AM - edited 03-18-2019 01:22 AM
We are configuring a SX20 with H323 CallSetup Mode as Direct, that is there is no CUCM, the connection is using Internet, with static address, there is no bandwidth problem or firewall. To make a test, I'm using Jabber Video with an account to jabber.com and this it's what it happen when initiating a call:
- If a initiate a call from SX20 to my Jabber Video, the call success with video and audio using H323
- If a initiate a call from Jabber Video to SX20, the call success with SIP but with no video input on both sites
Running software version TC6.0.0.876266.
What do I need to success with video using SIP?? What do I have to configure??
I appreciate any ideas that could help me for a solution.
Regards,
Juan Carlos Arias
06-27-2013 09:00 AM
I had found that to success with SIP calls, SIP functionanlity and features require SIP registrar and Proxy server, that is a VCS?? If there is no CUCM, does this work only with VCS??
Regards,
06-27-2013 09:08 AM
That is correct, It will work with VCS.
If you want to make SIP call from Sx20 codec then the Sx20 codec must register with the gatekeeper(VCS or CUCM).
Since SIP end points do not translate the Alias Id(jabber id) and it has to send the translation request to the gatekeeper(CUCM or VCS) and then the call passes through successfully.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide