12-15-2014 05:20 AM - edited 03-18-2019 03:47 AM
We have a SX80 that when we go in and set the SIP server to the CUCM and save it will remain until we reboot. For example, we set the SIP server to ccm1.domain.edu then if the system gets rebooted it "defaults" back to ccm1 with no domain information. We are on the latest TC. Thanks in advance.
Solved! Go to Solution.
12-15-2014 09:48 AM
With CUCM, the SIP server settings need to be made from CUCM and not on the endpoint itself. Each time an endpoint reboots, it downloads the configuration from CUCM and whatever you set on the endpoint will be overwritten. If you need to set a different CUCM IP, you will need to change the CallManager group under the Device pool and apply that device pool to the SX80 in CUCM.
12-15-2014 09:48 AM
With CUCM, the SIP server settings need to be made from CUCM and not on the endpoint itself. Each time an endpoint reboots, it downloads the configuration from CUCM and whatever you set on the endpoint will be overwritten. If you need to set a different CUCM IP, you will need to change the CallManager group under the Device pool and apply that device pool to the SX80 in CUCM.
12-15-2014 09:52 AM
Yeah thanks George. That is what I was finding. The Server defined in CUCM was set to a hostname and not IP. Thanks for your response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide