Hi,
We have a SX80 with 4 Precision 60 HD cameras and the unit is also be controlled by Crestron via rs232. We have the 4 cameras going through a 4x1 HDMI switcher (Extron) and a HDMI extender (Crestron) to the first camera input on the codec. For the control we have a little network switch on LAN port 2 of the codec and connected to the network jack of each camera. I've assigned the serial numbers to the cameras for control through the web GUI. Since I've installed the HDMI switcher and extender, Crestron looses communication with the codec. Any ideas?
Thanks
Michel
