Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
529
Views
0
Helpful
1
Replies

TC4.2 display issue

Justin Lewis
Level 1
Level 1

‎08-05-2011 07:05 AM - edited ‎03-17-2019 10:24 PM

I recently upgraded one of our C20s to test the new software. When the unit came back up, the resolution was completely off on the unit. I had to go in to the web GUI and toggle resolution off of Auto and back in order for the display to work correctly. Has anyone else come across this issue when upgrading to 4.2?

Thanks,

Justin Lewis

Labels:
0 Helpful
1 Reply 1

Jorgen Rehnstrand
Level 1
Level 1

‎08-22-2011 01:51 AM

I have a customer that upgraded the C20 from 4.1 to 4.2 and got resulotion problems to a NEC multisync LCD monitor. They tried to change the resolution from auto to 1920/1080 manually but it didn´t work. The only thing that workd was to downgrade to 4.1 again. At the same time NTP started to act strange. After every reboot and start the time goes back 1970.

0 Helpful
Customers Also Viewed These Support Documents