TelePresence ISDN Link CTS-ISDNLINK-K9

[robertdicarlo]

In the CTS-ISDNLINK-K9 under ISDN Bri Switch type it has AT&T. I need to know is this running 5ESS or 4ESS?

[Patrick Sparkman]

I checked the data sheet, didn't see any mention of AT&T, can you provide a link of the website or document to where you see that statement?

EDIT:

I found it, you're referring to the admin guide.  Always best to mention what guide or where you're reading what it is you're asking about.

I looked through all the documents I could find, wasn't able to find out what it was exactly running when configured to use AT&T.  Searching online didn't turn up much if at all either.

[robertdicarlo]

I have looked all over and I called CISCO but they will not help me unless I have a contract. Not even to answer a simple question like this. 

I just need the type so I can set up the network in my Lab.

I am going to try to change the SLICE from REDCOM to run NT1 instead of AT&T.

Rob

[Wayne DeNardi]

Similar to Patrick, I haven't been able to see much in the guides.

Given that you're going to be lab'ing it - you could try both and see which do or don't work?

And when calling Cisco, try calling the Sales team rather than the TAC - the TAC won't help if you don't have a service contract, but the Sales people should be able to assist finding the information for a prospective customer such as yourself.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.