cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
433
Views
0
Helpful
2
Replies

TMSXE Connection to TMS Cluster

Frank P
Level 1
Level 1

When running the TMSXE configuration wizard I am unable to connect to TMS by using its VIP FQDN. If I use each tms server name individually it works, but not when using the cluster name or VIP address (behind F5 NLB)

I can connect to TMS website using the FQDN of the VIP

Not sure what else to check. Any help would be appreciated. 

 

Note: All applications are running on different Windows Servers, same VLAN. 

 

Thanks,

1 Accepted Solution

Accepted Solutions

vivekksi
Cisco Employee
Cisco Employee

Hi Frank,

Please let me know is it not connecting or there is an issue with authentication.

Have you tried accessing tms on tmsxe server web interface, did it worked?

Regards,

Vivek

View solution in original post

2 Replies 2

vivekksi
Cisco Employee
Cisco Employee

Hi Frank,

Please let me know is it not connecting or there is an issue with authentication.

Have you tried accessing tms on tmsxe server web interface, did it worked?

Regards,

Vivek

Hi Vivek,

 

I was having a connections issue from TMSXE to TMS (on same vlan) but it has been resolved.

 

Thank you,