TP Conductor2.2 Integration with VCS8.0 ?

[Sumit Bhargava]

Hi,

1. Can VCS-C ver8.0 directly integrated with TP Conductor2.2 (via SIP Trunk/SIP) ?

            VCS-C 8.0-------------(SIP Trunk)-------------TP Conductor2.2

2. or is it that VCS8.0 is still fully supported by TP Conductor2.2 and is integrated via SIP Trunk to CUCM?

            VCS-C 8.0-----------(SIP Trunk)--------CUCM8.6/9.x----------(SIP Trunk)----------TP Conductor2.2

Thanks

Sumit

[Alok Jaiswal · Accepted solution]

Hi Sumit,

VCS can be integrated with conductor xc2.2 on previous version also in a B2BUA mode.  so same model is valid for ver x8.0 also.

http://www.cisco.com/en/US/docs/telepresence/infrastructure/conductor/config_guide/Cisco_TelePresence_Conductor_with_Cisco_VCS_B2BUA_Deployment_Guide_XC2-2.pdf

check above link for more details

Thanks

alok

[Sumit Bhargava]

Hi Alok,

Thanks for the quick revert and for the useful link. Appreciate it

Thanks & Regards

Sumit