06-02-2011 12:49 AM - edited 03-17-2019 10:19 PM
We have an existing voice Qos and need to implement Video QoS as well.As we can't implement end to end QoS because of service provider Mpls(may change dscp marking) between backbone network and remote location ,perhaps we need to implement NBAR/traffic policing.Another thing I must mention that available bandwidth for each interface is not same.
We need to apply the policy only on single interface ,not all the interfaces connecting to all remote locations.(ABR to ASBR not ABR to remote location).As already we have an existing Policy for voice applied to all interfaces connecting all remote locations we need to add a seperate class map to this policy for vedio.
Please suggest the way to implement the same and sample config
Existing config is like below
class-map match-any VOICE
match access-group name VOICE
match dscp ef
!
!
policy-map QOS
class VOICE
priority 30
set ip dscp ef
interface Serial1/2:9
ip address 192.168.33.209 255.255.255.252
ip tcp header-compression iphc-format
service-policy output QOS
ip rtp header-compression iphc-format
ip access-list extended VOICE
permit udp any any range 16384 32767
permit udp any range 16384 32767 any
permit tcp any range 2000 2002 any
permit tcp any any range 2000 2002
06-07-2011 02:20 AM
For your reference here is the link...
http://www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a0080094968.shtml
/Gagan
Please Rate useful Posts
06-07-2011 02:27 AM
yeah its good gagun
it was useful for me
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide