04-10-2010 06:54 PM - edited 03-17-2019 09:59 PM
Hi everyone
my connection like
Tanberg1--------IP--------Gatekeeper---------CUCM----------2811-----------PRI----------PSTN----------Tanberg2
2811 use most recent IOS 12.4(24)T3
the Tanberg1 doesn't have any BRI/PRI on it, IP only, it register with gatekeeper, from Tanberg1 I can make voice call over PSTN, so call routing part is working, the tanberg1 also can call an internal tanberg, all video call over IP is working
furthermore, Tanberg1 can call tanberg2 by bonding 6*B channels, however, as soon as the 6 calls answered, it disconnected immeidately, on tanberg2 I saw the incoming calls, but video never works, the return error code is 47 which indicate invalid resource
ISDN Serial0/0/1:23 interface
dsl 1, interface ISDN Switchtype = primary-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
5 Active Layer 3 Call(s)
CCB:callid=804D, sapi=0, ces=0, B-chan=13, calltype=VOICE
CCB:callid=804E, sapi=0, ces=0, B-chan=14, calltype=VOICE
CCB:callid=804F, sapi=0, ces=0, B-chan=15, calltype=VOICE
CCB:callid=8050, sapi=0, ces=0, B-chan=16, calltype=VOICE
CCB:callid=8051, sapi=0, ces=0, B-chan=17, calltype=VOICE
CCB:callid=8052, sapi=0, ces=0, B-chan=18, calltype=VOICE
0/0/1:23.13 h320p n S_CONNECT S_TSP_CONNECT
0/0/1:23.14 h320s - S_CONNECT S_TSP_CONNECT
0/0/1:23.15 h320s - S_CONNECT S_TSP_CONNECT
0/0/1:23.16 h320s - S_CONNECT S_TSP_CONNECT
0/0/1:23.17 h320s - S_CONNECT S_TSP_CONNECT
0/0/1:23.18 h320s - S_CONNECT S_TSP_CONNECT
0/0/1:23.19 - - -
0/0/1:23.20 - - -
0/0/1:23.21 - - -
0/0/1:23.22 - - -
0/0/1:23.23 - - -
Apr 11 02:16:25.329: %ISDN-6-CONNECT: Interface Serial0/0/1:17 is now connected to 19782922853 N/A
Apr 11 02:16:26.973: %ISDN-6-DISCONNECT: Interface Serial0/0/1:13 disconnected from 19782922853 , call lasted 6 seconds
Apr 11 02:16:26.977: %ISDN-6-DISCONNECT: Interface Serial0/0/1:14 disconnected from 19782922853 , call lasted 4 seconds
Apr 11 02:16:26.977: %ISDN-6-DISCONNECT: Interface Serial0/0/1:15 disconnected from 19782922853 , call lasted 3 seconds
Apr 11 02:16:26.977: %ISDN-6-DISCONNECT: Interface Serial0/0/1:16 disconnected from 19782922853 , call lasted 2 seconds
Apr 11 02:16:26.977: %ISDN-6-DISCONNECT: Interface Serial0/0/1:17 disconnected from 19782922853 , call lasted 1 seconds
Apr 11 02:16:26.985: %ISDN-6-DISCONNECT: Interface Serial0/0/1:12 disconnected from 19782922853 , call lasted 10 seconds
This cause is used to report a resource unavailable event only when no other cause in the resource unavailable class applies.
i am following the two below docs, but still not working
http://cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00807ca099.shtml
http://www.ciscosystems.sc/en/US/docs/video/milticomm/h320Bonding.html
appreciate any input
thanks
04-11-2010 04:47 AM
You will likely need TAC support and much patience to have this working.
If you want a sure solution, convert tandberg2 to IP.
04-11-2010 09:14 AM
will ask TAC help
but according the doc, it should work
another thing, convert Tanberg2 is not always possible, we don't necessary control all Tanberg in the world
thanks for your reply
04-11-2010 10:29 AM
It should, but it's new in 12.4T, and few people uses it in this IP world of today.
Consequently, chances of running into bugs or interop issues are higher than with other features.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide