03-14-2013 02:48 PM - edited 03-18-2019 12:46 AM
We have some CTS-500 and EX90 units deployed on our network. We connect IP phones to the CTS-500 for users to start/stop and perform other options during meetings. Using a link like http://192.168.1.5/CGI/Screenshot we are able to see the phone's display and assist users with training, troubleshooting as well as remotely monitor a registration process.
Is there something available in the EX90 endpoints that would allow similar capabilities?
Solved! Go to Solution.
03-14-2013 02:59 PM
On an EX90 you can take a snapshot of the touch if.when it is directly connected.
With TC 6 Please use
http://
On the latest sw (TC5.1); from the codec’s web interface you will be able to take screenshots of the Touch interface. Short description:
http://
Here are the steps to take screenshots:
06-06-2013 11:05 PM
I've noticed that with TC6 the path has changed from /wsgi/translation to /web/translation.
Please remember to mark helpful responses and to set your question as answered if appropriate.
03-14-2013 02:59 PM
On an EX90 you can take a snapshot of the touch if.when it is directly connected.
With TC 6 Please use
http://
On the latest sw (TC5.1); from the codec’s web interface you will be able to take screenshots of the Touch interface. Short description:
http://
Here are the steps to take screenshots:
06-06-2013 11:05 PM
I've noticed that with TC6 the path has changed from /wsgi/translation to /web/translation.
Please remember to mark helpful responses and to set your question as answered if appropriate.
03-15-2013 03:46 AM
Just use the web interface!
It looks different than the interface on touch panel, but you will be able to configure and control the EX90 remotely.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide