TelePresence and Video Infrastructure

Hi all.I have a CTS 3200 with a HFR codec and extra side LCD displays.When not in a call and sharing presentation the laptop image is displayed on the side screen. Floor screen and on the center main display.However when in a call and sharing present...

I have been reviewing the documentation located at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/administration/guide/7925cfgu.html#wp1336223When I try and change the phone configuration for a 7925G handset - namely the 'web ...

Hi Quest about AD user integration vs Non AD user integration and if its possible? We  currently have a  VCSc v7.2, VCSe v7.2 and TMS 13.2.2 running TMSPE. We  would like it for our internal users to be integrated with AD so they  are able to use ...

Hi there,I have an Cisco SPA501g IP phone which is connected to my home router.When the phone rings it only does for 60 seconds then goes to voicemail. I need to extend the ringing tomeout, but I can't see an option anywhere.Any help would be great.T...

we have a vcsc and vcse in our environment, and have deployed some jabber video for users which register to our vcse. when we call from a c90 endpoint (registered to vcsc) to jabber video on ipad (registered to vcse), some users did not get the video...

Testing out pointing to a higher level OU in TMS for Movi Users and I am getting an error I can't run down. I am able to import the Users into TMS (53000 Users), but once the synch starts with VCS it errors out with the following error:"TMS Provision...

Hello,Just installed a MCU 4215. When i call from my endpoints (SX20), the video quality is very poor. Checking the info of the call (attached img) the only thing that comes to my attention is the low fps rate...The endpoint and MCU are connected to ...

HI,Customer has MX300 registered to CUCM 8.6.2a. They use TP Server for multi-point calls. They are reporting that the setting available on the Touch panel, "Layout for remote participants" does not actually change the view. After digging into this a...

Hi,i have a problem with our two CTS 1300 Devices. They are registered on CUCM but not in TMS 14.2. I have tried to delete (purge) the device in TMS and add the devices back without success.I have also tried to point TMS to the subscriber CUCM also w...

         My client has MS AD - 2008R2, and uses Jabber 9.2 along with CUCM 9.1 (BE6K). They have one video endpoint (SX-20) and several hundred video phones (8971/9971), plus jabber on their iPads. They want the lone SX-20 to be able to dial from dir...

Certification error on TMS using TLS. We are receiving the following error message on TMS when trying to replicate using TLS. '(400) Certificate Validation Error : TLS connection failure: _ssl.c:484: The handshake operation timed out'There are no fir...