11-12-2007 11:51 AM - edited 03-17-2019 09:10 PM
hello
we have configured a switch IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(13)EA1 , and i noticed that u cant configure voice vlan before trunk that port.
Is there any newer ios version which is release me that trunking or we need new switches ?
thanks
Solved! Go to Solution.
11-13-2007 07:41 AM
Hi Bill,
Excellent question. We have used many 2950's through the years and did discover this limitation when working with Voice Vlans. We have never found a workaround that enabled us to not have to use the (switchport mode trunk) config as you can with newer switch models.
Hope this helps!
Rob
11-13-2007 01:43 PM
We have IOS
12.1(22)EA6
running and that works without setting the port in trunking mode.
regards
11-13-2007 07:41 AM
Hi Bill,
Excellent question. We have used many 2950's through the years and did discover this limitation when working with Voice Vlans. We have never found a workaround that enabled us to not have to use the (switchport mode trunk) config as you can with newer switch models.
Hope this helps!
Rob
11-13-2007 01:43 PM
We have IOS
12.1(22)EA6
running and that works without setting the port in trunking mode.
regards
11-14-2007 05:43 AM
Hi Ulrich,
Nice find on this one :) I'll have to lab up a 2950 and give this a try. 5 points for your good support here!
Thanks again,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide