06-30-2006 09:53 AM - edited 03-17-2019 08:44 PM
I'm trying to figure out what I need to build a videoconferencing
system.
I already have:
Main site with a Cisco 3825 w/ Adv IP 12.4, where I expect I'll have 5
- 10 users who will regularly use a videoconferencing system
Remote site with a Cisco 2811 w/ Adv IP 12.4, where I'll have 3 - 5
users
I'll be adding 5 - 6 additional remote sites with 2811s, with 3 - 5
regular users each.
Everyone will be connected across T1s and IP.
I though I could just use MeetingPlace Express, but I've just realized
that MPE is for voice and web conferencing only, and has no video
component.
So I'm trying to figure out all the bits and pieces of MeetingPlace,
and I just can't work out what I truly need. If I'm half-way on track,
a 8106 30UL IP Bundle will get me started, but I'll also have to buy a
Media Convergence Server AND a Cisco Unified Videoconferencing 3515 AND
the Video Integration software, not including any goodies like Outlook integration or sufficient web
conferencing licenses.
Is there anything else I'm missing? Or am I way off base, and MPE will
work just fine? I sure would appreciate the advise.
06-30-2006 10:37 PM
This might be helpful:
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns280/c649/ccmigration_09186a00800d67f6.pdf
Regards, Martin
07-07-2006 07:26 PM
Hi. It sounds like you've gotten further than I have. I'm lost regarding where to go from the camera. I thought Cisco had camera's and screens for a complete solution. I am lost. I believe I need a 3500 series device but how it connects to the LAN, I am very confused about. Do I need to buy a camera and microphone from another vendor?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide