cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
200
Views
0
Helpful
1
Replies
Highlighted
Beginner

Audio Distribution from Room Kit Plus

Hello,

 

we have a requirement for a fixed volume output from a Cisco Room Kit plus system for hearing augmentation and a variable feed to room's ceiling speakers. The volume is controlled from the Cisco Touch 10.

The analog output shall be used for the variable level control for room speakers, can we separately route audio on the HDMI channel at a fixed level ? 

 

Appreciate your thoughts on how this can be achieved.

1 REPLY 1
Highlighted
VIP Advisor

Re: Audio Distribution from Room Kit Plus

I do not believe this is possible - the volume control affects all the audio outputs at the same time - you cannot adjust one without the others.

The other option is to create a separate volume adjustment on your DSP / external Room Audio and not use default the Touch10 volume control.  You could then put a macro on the RoomKit that sets the volume back to the default level every time it is changed just in case someone does try to adjust it with the Touch10.  You could present this additional volume control on to the Touch10 using the In-Room Conttol functionality.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey