02-28-2017 08:46 AM - edited 03-19-2019 12:10 PM
I have a situation with preservation mode, when on a conference call after 15min 8845 phone display preservation mode and disconnect the calls, the SRST Reference is disabled plus no issue with the MPLS circuits, any thoughts.
02-28-2017 11:20 PM
Hi,
What is the cucm version, phone firmware version?
Does it affect all 8845's or a few of them?
Are these phones colocated at the same site as cucm or at remote sites?
Does it only happen on conference calls after exactly 15 minutes or normal phone calls as well after 15 minutes?
Manish
03-06-2018 07:12 AM
I have this same problem on CUCM version 10.5.2.10000-5 and the 8845 phones are using firmware version sip8845_65.12-0-1-11. Phones are at sites remote from the CM cluster. Call flow is phone -->SIP Trunk -->Asterisk Conference Server. Issue appears to only occur during conference calls to the Asterisk Conference Server.
03-06-2018 07:13 AM
03-06-2018 08:57 PM
03-14-2018 07:40 AM
I don't have a wireshark just yet but I'm trying to get one. Something that I found in the console logs from the web interface of the phone, I've attached below. Getting a lot of ICMP unreachable messages for the IP address of the Asterisk conference server. As a footnote... This issue is not occurring with any other devices except for 8845, 8865, and Jabber phones. Other SIP phones such as the CP9971 are not having the issue.
03-14-2018 08:07 AM
03-14-2018 08:08 AM
03-14-2018 11:52 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide