AA setup on CUE

[Vijay Patil]

We are planning for configuring Auto-attendant on CUE Module..which is inserted in Cisco 2900 series router with CME configured

where our site is running with the FXO lines there are 4 FXO lines with different DID number 

Can we configure AA on this setup on 2 DID number ,

And is there any challenge to configure AA on the FXO line

AA call flow is very simple which is attached here

[Aseem Anand]

Hi Vijay,

On the two FXO ports, you can use the connection plar opx command  to forward the incoming calls on this port to the auto attendant number.

Aseem

(Please rate if useful)