12-24-2010 03:50 PM - edited 03-19-2019 02:07 AM
I have a CUPS server working with OCS performing RCC, but we're in the process of upgrading to Lync. I have the CUPS_OCS_RCC plugin, but I can't find a similar plugin for Lync. Does anyone have experience with this type of deployment. I'm running CUPs 8.0.3.10000-4 and CUCM 8.0.3.20000-2. I've been able to work through the integration and now I'm stuck on this last step.
12-25-2010 04:47 AM
Testing is currently being done. Once testing completed successfully, this should get reflected on cisco.com in the compatibility guide and/or release notes.
12-30-2010 07:49 AM
Hello,
I'm trying to do in my test environment, but is not working.
That works well with OCS 2007.
Can you give some explanations about this case and how to do it?
Tk´s
12-31-2010 03:26 AM
Hi ,
Today it is not supported, once it is supported it would get reflected in the release notes. If things go well it will be published there in the release notes for 8.5. Since it is not working for you and it works ok with 2007 I would suspect we may need to some additional coding or configuration to make this work.
01-04-2011 07:13 AM
Do you know if a Beta is available or if there is an estimated release date for that plugin?
01-27-2011 08:05 PM
Do you know if there has been any advances with this?
01-28-2011 12:05 AM
It did not make it for 8.5(1), it is still under investigation. You can set up the Cisco Notification Service to be notified when the next release is available (and then check the release notes / integration guide).
01-28-2011 05:37 AM
Thanks for the updates, however that link just takes me to the Cisco main page.
01-28-2011 09:22 AM
hello,
the realese notes are already online but nothing about of RCC with Lync.
Anyone have already conect ?
help pls
01-28-2011 01:59 PM
No I don't have it running yet. I had it with OCS but now I'm trying to replicate the same with Lync. I've looked at the release notes and they only speak to doing this with OCS. I'm shocked that Cisco is so far behind the curve on this. Lync has been out for a few months now. As a partner I'm trying to keep people buy Cisco and not going with the voice services of Lync.
01-28-2011 02:25 PM
i have the same problem.. i am still looking for answer
...
07-14-2011 08:36 AM
Any update on this? Just looking for some direction before I headed out into the wild wild wilderness today.
Looking to do RCC with Lync
07-14-2011 11:33 PM
Hi Shane,
This works fine now with the new release. You need to use 8.5(2) or higher.
I tried it in the lab some time ago and got it to work without problems.
11-22-2011 05:18 AM
Hi.
Is it possible to integrate MS Lync Server 2010 with CallManagerExpress on UC500 series?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide