10-14-2014
02:52 AM
- last edited on
03-25-2019
09:52 PM
by
ciscomoderator
hi,
I just noticed that when i pickup the phone handset and press any extension it's just silence without calling that desire extension. If i pressed the loudspeaker button or press the ext number and pickup the handset it;s working fine. It's using C6921 ip phone model.
Kindly please advise
10-14-2014 08:03 AM
Have you checked for overlapping??
10-14-2014 08:09 AM
Did you meant on the route pattern things?
10-14-2014 08:29 AM
I mean dial plan overlapping. Your WHOLE dial plan.
10-16-2014 04:32 AM
Hi Jaime, is there any setting on the call manager if phone is off hook and it wait for 5th digits if dial plan is over lapping.
e.g. I have two numbers 4701 and 47010 , so if some one wanna dial 47010 on off hook and it shouls not dial immidiatly by pressing 4701 it should wait for next 0 to complete its five digits.
10-16-2014 07:41 AM
T302 determines how much longer it will wait before trying to place the call, but there is no setting that tells CUCM to wait for X amount of digits and then consider that's all you'll dial.
If there's overlapping, you'll always have this behavior.
10-16-2014 08:50 AM
Hi jaime,
Default T302 inside enterprise parameters is 15000.. If i lower down to 5000,means that it will take much more time compared to default value correct me
10-16-2014 08:55 AM
No, read the T302 timer description.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide