Callmanager Express Jabber for Windows (Full UC Mode)

[Nkechi Latunji]

Hi,

The compatibility matrix for CME 10.5 says it supports Jabber for Windows Full UC mode. Can anyone point me to the Cisco doc for this configuration or if you have one post it please.

This is all I could find

http://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118715-technote-jabber-00.html

Thanks

[Terry Cheema · Accepted solution]

For full UC mode you will need integrated IM & Presence.

Ref: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.pdf

Cisco Jabber Client Support On CME

Cisco Jabber CSF client can be provisioned in 2 modes:
Full UC mode (with integrated IM and Presence services) and Phone only mode.

From CME-10.5 onwards the phone-only mode of Cisco Jabber CSF devices is also supported. This can be configured with the option 'phone-mode phone-only' under 'voice
register global' or 'voice register pool' or 'voice register template' config

To Configure in full UC mode:

Search in same doc: "Configuring Cisco Jabber CSF Client: Example "

-Terry

Please rate all helpful posts and mark the thread as answered if you have no other queries.