Can't Install Unity 8.0.2 on VM

[ccentbound]

MISSION:

To install Unity Connection 8.0.2 using the vSphere Client

PROBLEM:

The "Product Deployment Selection" page of the installation does not give the option to select Unity Connection.  Under the section titled "Products not supported on current hardware:", Cisco Unity Connection is listed.

HARDWARE:

Dell PowerEdge Gen 3 Server

3 TB SATA drives that a RAID 5 has been performed on. 

INSTALL PARAMETERS:

Configuration = Typical

Name = UnityC1

Guest Operating System = I tried both Red Hat Enterprise Linux 3 (32-bit) and Red Hat Enterprise Linux 5 (32-bit)

# of NICs to connect = 1

NIC 1 = VM Network

Adapter = Flexible

Connect at Power On = Checked

Available space (GB) = 1338.4

Virtual disk size = I tried 180 GB, 256 GB, Thin Provision, and Thick Provision Lazy Zeroed

Memory Size = 4 GB

Media Check performed = Yes = No errors

REQUEST:

Can someone kindly tell me the reason for not being able to select or install Unity Connection as described in the PROBLEM statement above?

Please view attached screen shots of installation attempt results..

Thank you kindly as I sincerely appreciate and desperately welcome your help.

[Jaime Valencia]

Match the EXACT specs outlined here and then try

OVA Template Details for  Unity Connection Release 8.0

http://docwiki.cisco.com/wiki/OVA_Template_Details_for_Unity_Connection_Release_8.0

Also, before 8.6 releases we used RHEL 4, 8.6 and above are RHEL 5.

RHEL 3 was never used.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk