Cannot Access Unity Express GUI!!!! -HELP

[brian-henry]

I have the Cisco Unity Express module in a 3745 with 3 users in the administrators group, but none of them can access the web page?

http://192.168.6.2/Web

I can ping from CME on the router to 192.168.6.2 and get the login page. There is no enable password, could this be the problem?

[fvalade]

Sorry if it not clear. I can't finish the wizard because the cme ip in the wizard show the wrong ip. My call manager express use ip 250 and the wizard show 1. When I put the username and the password during the wizard it give me an error because it can't connect to CME. For sure it can't connect because its the wrong ip but I can't find any way to change this ip in the wizard.

[fvalade]

problem resolved

the problem was :

interface Service-Engine0/0

ip unnumbered FastEthernet0/0

service-module ip address 192.168.69.251 255.255.255.0

service-module ip default-gateway 192.168.69.251

Ip default-gateway is not the network default gateway but the sip gateway default ip. Its ok now and everything is working well.