CCM disk problem???

[Ivan Marinovic]

Hi,

Today I return from my vacation and  noticed red light on CCM HDD!!

In system report I found this:

physicaldrive 1:1

         Port: 2I

         Box: 1

         Bay: 1

       Status: Failed

Please can someone advice me what to do? Can I repair this? Check some other thing?? I appreciate any advice.

Regards,

Ivan

all report:

MCS Model	7835H2
CPU Speed	2333
RAM	2G
Partitions	Partition Name:     /          Total:     25331720K      Available:     13569832K           Used:     11504528K   Unrestricted:     False Partition Name:     /partB          Total:     25331752K      Available:     13693880K           Used:     11380512K   Unrestricted:     False Partition Name:     /common          Total:     88139580K      Available:     45300620K           Used:     38361648K   Unrestricted:     Not Supported
RAID Configuration	Smart Array P400 in Slot 1    Bus Interface: PCI    Slot: 1    Serial Number: PAFGK0R9VXJ05M    Cache Serial Number: PA82C0J9VX50DL    RAID 6 (ADG) Status: Enabled    RAID 6 (ADG) Enabler Status: Enabled    Controller Status: OK    Chassis Slot:    Hardware Revision: Rev E    Firmware Version: 5.26    Rebuild Priority: Medium    Expand Priority: Medium    Surface Scan Delay: 15 sec    Cache Board Present: True    Cache Status: OK    Accelerator Ratio: 50% Read / 50% Write    Total Cache Size: 256 MB    Battery Pack Count: 1    Battery Status: OK    SATA NCQ Supported: True    Array: A       Interface Type: SAS       Unused Space: 0 MB       Status: Failed       Logical Drive: 1          Size: 136.7 GB          Fault Tolerance: RAID 1+0          Heads: 255          Sectors Per Track: 32          Cylinders: 35132          Stripe Size: 64 KB          Status: Interim Recovery Mode          Array Accelerator: Enabled          Unique Identifier: 600508B10010523956584A30354D0001          Disk Name: /dev/cciss/c0d0          Mount Points: / 24.5 GB, /partB 24.5 GB, /grub 258 MB, /common 85.4 GB       physicaldrive 1:1          Port: 2I          Box: 1          Bay: 1         Status: Failed         Drive Type: Data Drive          Interface Type: SAS          Size: 146 GB          Rotational Speed: 10000          Firmware Revision: HPD0          Serial Number: D0A2P9703JB10928          Model: HP      DG0146BARTP           physicaldrive 1:2          Port: 2I          Box: 1          Bay: 2          Status: OK          Drive Type: Data Drive          Interface Type: SAS          Size: 146 GB          Rotational Speed: 10000          Firmware Revision: HPD0          Serial Number: D0A2P9703JDT0928          Model: HP      DG0146BARTP
RAID Version	RAID Firmware Version:  5.26 RAID BIOS Version: N/A
BIOS Information	11/01/2008

[bvanturn]

You can try to run the latest FWUCD available for 7835-H2.

If that does not help, if this is a Cisco provided MCS server which is  under contract/warrenty you should open a service request for the faulty part to be replaced. If this server was purchased from HP, you need to contact HP for replacing the parts.

[Ivan Marinovic]

Thank you on your replay. I will first study what I need to do... and next week I will try to upgrade.