09-10-2010 04:12 AM - edited 03-19-2019 01:33 AM
We are planning on moving the standby CCX server to another location. we do not have any ip or licensing issues. they have been installed as a LAN deployment. has anyone migrated to a WAN deployment (hopefully without having to rebuild)? We know some of the changes is to do with Heartbeat, but don't know where the parameters can be changed.
09-10-2010 11:04 AM
I think the keys are to ensure requirements are met: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp262764
And then to move the server, then change the IP (and other associated network configuration settings):
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrugx.html
Good luck!
09-13-2010 02:09 AM
Does Contact Centre Express have the same WAN setup requirements as Unity Connection?
09-13-2010 07:07 AM
Possible but unlikely. Each development group has to come up with the wan requirements on thier own based on how much data needs to be synched between servers and how time sensitive it is.
UC moves a lot of data but it isn't very time sensitive. CM moves little data but is much more time sensitive. Not sure about the IPCC side of the house, hopefully someone more familiar with that product will chime in.
09-15-2010 06:28 AM
no anyone in the CCX BU who can answer this?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide