02-05-2015 06:30 PM - edited 03-19-2019 09:08 AM
Hello,
I have installed a I&P 10.5 in a cluster.
I have added the 2 I&P in a Publisher but the second node of the I&P not starting the service PRESENCE ENGINE
All nodes are registered on the publisher with IP address.
The error is the follow:
Cisco IM and Presence Data Monitor : (10.248.4.41) The Cisco IM and Presence Data Monitor has detected that database replication is not complete, and/or that the Cisco Sync Agent sync from Cisco Unified Communications Manager is not complete. Some services will remain in the "Starting" state until replication and the Cisco Sync Agent sync are successfully completed.
Regards,
02-05-2015 07:21 PM
I have found this:
The sqlhosts file on 10.248.4.41 does not match the publisher.
07-31-2015 11:49 AM
08-03-2015 07:27 AM
Hello,
In my case, I have resolved the issue few months ago, I did not have configured the presence reundancy group, because this is new in the 10.5 versión.
Select System > Presence Redundancy Groups.
regards,
OG
05-15-2017 03:38 PM
Cisco IM and Presence Data Monitor The Cisco IM and Presence Data Monitor has detected that database replication is not complete, and/or that the Cisco Sync Agent sync from Cisco Unified Communications Manager is not complete. Some services will remain in the "Starting" state until replication and the Cisco Sync Agent sync are successfully completed.
We hope from you to help with this issue .
05-21-2017 01:27 AM
hi
You can restart these two services without issue;
open CLI
utils service restart
Cisco DRF Local
Cisco DRF Master
You take Buck up
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide