cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
318
Views
0
Helpful
3
Replies

Cisco UC Integration for Lync 9.7x EOL

douglascote
Level 1
Level 1

Greetings,

Can anyone tell me what the end-of-life/support date is for Cisco UC Integration for Microsoft Lync v9.7x? I found a bulletin pertaining to v9.2x and the EOL date, but nothing for v9.7x. Any assistance you can provide is appreciated.

Thanks,

Doug

2 Accepted Solutions

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

I couldn't find anything public facing googling that, it just might be there's still not a defined date, if you want further information, you would need to engage your SE/AM to get that information.

HTH

java

if this helps, please rate

View solution in original post

Deepak Rawat
Cisco Employee
Cisco Employee

Doug,

If you will check the below document for Microsoft Lync Version 9.2x, there is a line in it "New orders for Cisco® UC Integration for Microsoft Lync version 9.2x software are already being filled with version 9.7x."

http://www.cisco.com/c/en/us/products/collateral/unified-communications/uc-integration-tm-microsoft-lync/bulletin-c25-735640.html

What this means in that 9.7x is going to be there and should be used for integrating with UC going forward. Secondly, whenever Cisco will announce the EOS/EOL date for UC integration with Microsoft Lync Version 9.7x the documents will be updated accordingly as well so you can check them then.

Regards

Deepak

- Rate Helpful Posts -

View solution in original post

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

I couldn't find anything public facing googling that, it just might be there's still not a defined date, if you want further information, you would need to engage your SE/AM to get that information.

HTH

java

if this helps, please rate

Deepak Rawat
Cisco Employee
Cisco Employee

Doug,

If you will check the below document for Microsoft Lync Version 9.2x, there is a line in it "New orders for Cisco® UC Integration for Microsoft Lync version 9.2x software are already being filled with version 9.7x."

http://www.cisco.com/c/en/us/products/collateral/unified-communications/uc-integration-tm-microsoft-lync/bulletin-c25-735640.html

What this means in that 9.7x is going to be there and should be used for integrating with UC going forward. Secondly, whenever Cisco will announce the EOS/EOL date for UC integration with Microsoft Lync Version 9.7x the documents will be updated accordingly as well so you can check them then.

Regards

Deepak

- Rate Helpful Posts -

douglascote
Level 1
Level 1

Thanks for the quick responses.