02-24-2010 04:41 AM - edited 03-19-2019 12:31 AM
Hi,
im trying to configure extension mobility in cme 7 but i dont understand what a few of the parameters are that are shown in the cme admin guide. where alot of them are said to be optional and i dont configure them, the system doesnt work???
would it be ok if someone could please help me. check my config and give me some advice on tidying up my config please?
also, when i assign a seconf number to the second line on a users EM profile it doesnt appear on the phone?
and, can someone please explain how i would configure "dummy DN's" on the IP phones when they are logged out?
any advice would be appreciated.
many thanks
Dimitri
Solved! Go to Solution.
03-02-2010 05:43 AM
Hi,
Kindly find it below:
=====================================
voice logout-profile 2
number 5003 type normal
ephone 1
logout-profile 2
ephone 2
logout-profile 2
ephone 3
logout-profile 2
.
.
.
.
..
.
.
ephone 40
logout-profile 2
========================================
Like this you'll have the DN 5003 on the 40-ephones
Wish this be helpfull
Please rate successfull posts
Thanks
03-01-2010 04:10 PM
Hi,
The phone DNs when logged out will use the DN configured under voice logout profile and when logged in, the phone will use the user profile DNs
Wish this be helpful
Thanks
03-02-2010 12:57 AM
thanks for that.
so does that mean that if i have 40 physical IP Phones i must configure 40 voice logout-profiles and assign each voice logout-profile to a physical IP phone?
can i not have only 1 voice logout-profile with 40 DN's and they automatically get assigned to a phone?
thanks
Dimitri
03-02-2010 02:06 AM
Hi,
Good thinking
Yes you can use the same logout profile for more than one phone
No need to create a 40 logout profile for each 40 phone
Wish this be helpful
thanks
03-02-2010 02:08 AM
thats great news. thank you.
would it be possible for you to show me an example config for the voice logout profile with 40 DN's please?
Dimitri
03-02-2010 05:43 AM
Hi,
Kindly find it below:
=====================================
voice logout-profile 2
number 5003 type normal
ephone 1
logout-profile 2
ephone 2
logout-profile 2
ephone 3
logout-profile 2
.
.
.
.
..
.
.
ephone 40
logout-profile 2
========================================
Like this you'll have the DN 5003 on the 40-ephones
Wish this be helpfull
Please rate successfull posts
Thanks
03-02-2010 07:42 AM
Thank you very much!
Thats great.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide