Hi Kindly we have WLC 9800, we have a working SSID for our Employee, it's security is set to dot1x with AAA group which is authenticating through radius of our domain We are creating another SSID with dual authentication "MAC white List + dot1x local...

Hi Our branches are connected through WAN using 2 Links One main from one service provider and secondry through another service provider and 3rd link 3G 1st and 2nd ISP links configured with BGP, all traffic go through 1st link as primary. Secondry l...

Hi, We have a monitoring system and we need to check if the switch is up or down Is it better to use ICMP ping or SNMP Is ICMP is better than SNMP as SNMP consumes more bandwidth, overhead and utilize switches resources more than ICMP ? We need to lo...

Hi, We need tointegrate our WLC 9800 with LDAP with mode secure on port 636 This is to authenticate our clients when connecting to SSID to enter domain credentials We have finished below 1- got root cert from Microsoft team then I trusted it 2- Gener...

Hi We have a problem with our 3905 IP Phones. When we try to change configuration. The phone move to rejected status and couldn't register to our CUCM 12.5 I found many many tftp timeout on the phone log web page When I do capture on the phone port, ...