03-15-2007 01:52 PM - last edited on 03-25-2019 09:24 PM by ciscomoderator
Hi everybody,
I configured a CMM module (WS-SVC-CMM-ACT) with CCM ver 4.1.3 as a conference bridge and transcoder, both are properly registered in the CCM.
When I try to make a conference, or to use the trancoder resources, the connection is established but there is not RTP voice traffic. I know that there is not routing problems.
When I type the "show sccp connnections" on the CMM, it shows the connections of the IP phones on the conference.
Any suggestions?
08-02-2007 06:41 AM
I have the same problem. Were you able to resolve? If yes, I'd like to know so I can resolve my problem. Thanks in advance!!!
08-03-2007 11:42 AM
Yes, I was able to solve the problem.
I didn?t realize that the fastethernet interface of the CMM was not in the same vlan as the gigabitethernet interface.
Please let me know if you could solve it.
05-04-2009 12:23 PM
I have the same problem, and my Fast Ethernet Int & Gig Int are in the same VLAN but still no RTP voice stream.
Please let me know if there is a different solution
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide