Configure SIP trunk

[Pete720]

Hello everyone,

    I'm working on a class project on voip and have a little knowledge on it.

    I'm using CUCM 8.6. I setup HQ with MGCP gateway. The gateway is connected and working. I need to setup SIP voice gateway for Branch.  How do I configure SIP gateway? Do I have to do any configuration in Branch router or everything is done through CUCM?

Any help is greatly appreciated.

Thanks

[Pete720]

Also what do i have to do to configure SRST in Branch with SIP gateway?

[Jaime Valencia]

CUCM can do SIP trunking, it depends on what you need.

Nothing related to a SIP trunk on ISR is done via CUCM, it's all CLI, you can just search "SIP trunk configuration" on cisco.com to get examples, same for SRST, "SRST configuration" on cisco.com

[Irshad Mohammed Hussain · Accepted solution]

Use below link

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cvd/entsiptrk.html