07-10-2007 05:07 AM - edited 03-18-2019 07:33 PM
We are creating a template for a 7961 and have created the template but when setting up the phone, the new template does not show in the drop down box as an option. We have reset the device and it still does not show up. Is there anything additional that needs to be done to be able to select the new template or make it appear in the drop down box. We are running Call Manager 4.1 Thanks.
Solved! Go to Solution.
07-10-2007 05:39 AM
One thing to keep in mind here is ensure that the Phone is a 7961G and not a 796-GE. The template for both the phones are different and you cannot use the same for both the phones. To know the exact phone model, you can search for the Phone on CM Admin page and it will show wether this is a GE model or not
07-10-2007 05:39 AM
One thing to keep in mind here is ensure that the Phone is a 7961G and not a 796-GE. The template for both the phones are different and you cannot use the same for both the phones. To know the exact phone model, you can search for the Phone on CM Admin page and it will show wether this is a GE model or not
07-10-2007 05:44 AM
Thanks for your response. That was actually the issue. We got it just as you responded but either way, that was the solution. Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide