11-06-2008 08:19 PM - edited 03-18-2019 09:56 PM
Hi,
I have CUCM 6.0.1.3000-7 and registered two third party SIP device to the Server.
While I am making the call between these two devices, the media (RTP) is flowing end to end, not through CUCM.
I want to route all the media(RTP) through CUCM. How is it possible?
11-07-2008 01:34 AM
Media is always end to end.......even with the phones. Only the signaling is routed to the CUCM. I doubt there is a way to do this.
11-07-2008 10:34 AM
CUCM is only a call agent, signaling is stimulus-response. RTP is always between endpoints, that's the whole point of call preservation. if CCM fails, calls are preserved because RTP is between endpoints.
HTH
java
if this helps, please rate
11-08-2008 02:01 AM
Thanks for your response.
With the SCCP supported devices, does the media is routed through the CUCM ?
11-08-2008 08:17 AM
no, CUCM does not make media flow-thru
in any protocol
media is between devices. only reason a device sends media to CCM is to use the SW CFB.
if you need that start looking at CUBE
HTH
java
if this helps, please rate
11-09-2008 08:36 PM
What is thins SW CFB and CUBE?
You have any reference link to these topics?
11-10-2008 07:08 AM
Software Conference Bridge
Cisco Unified Border Element
Documentation can be easily found in CCO
HTH
java
if this helps, please rate
11-10-2008 11:17 PM
Thank you very much for your support.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide