CUCM integration with Right FAX(Enable T.38 protocol on Cisco MGCP GW)

[shaikh ibrahim]

             HI All , I am going ot integrate cucm 8.6 & mgcp VG with right fax . Can you provide me  the document.

PSTN---GW----Mgcp-----CUCM 8.0X----SIP-----RightFax

Moreover does CUCM 8.6 support t.38 fax protocol??how i enbale T.38 on mgcp VG.

Thankyou in advance..

[nikshah]

Hi Shaikh,

Hope this helps

http://tools.cisco.com/search/display?url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Fvoice_ip_comm%2Ffax_server%2F90%2Fadmingd.pdf&pos=1&strqueryid=1&websessionid=yD1AIkMvq9Inh-1mAKXXZZc

Regards

Niket

[Ayodeji Okanlawon]

Hi,

This is the MGCP config you need to enable T.38

mgcp

mgcp call-agent x.x.x.x.x 2427 service-type mgcp version 0.1-----------------------x.x.x.x is your cucm ip address

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp package-capability rtp-package

mgcp package-capability sst-package

mgcp package-capability pre-package

mgcp default-package fxr-package

no mgcp package-capability res-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp bind control source-interface GigabitEthernet0/0-------------------you need to bing mgcp to whatever interfcae you are using

mgcp bind media source-interface GigabitEthernet0/0

mgcp profile default

Please rate useful posts

"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"