CUCP Ver.8.02 DeskPhone not working

markcarat · ‎09-01-2010

Hello

I have two computers and both have CUCP 8.0.2 installed. On one computer both soft phone and desk phone works fine. On another computer, both soft phone and desk phone are not working. Since I log in with the same user name, I guess my CUPS setings should be good.

The error I received on the non working PC is "A phone initilazation error has occurred. Failed to get configuration. [400]."

By the way, both PC are running Windows 7 64-bit.

Thanks

Mark

pastryer · ‎09-29-2011

I was able to fix this same issue with the following fix.

Specs

CUCM - 8.51

CUPC - 8.51

Win 7 64bit

Issue

Call & Call with Video where both grayed out

In the Help/Show Server Health menu options the Call Control section was missing

In the Help/Show Server Health menu and click on the Notifications has the error

A Phone Initilation Error has Occurred. Failed to get configuration. [400]

Fix

After making sure all configuration was correct with the CTI users I found that the Windows Firewall was at fault

Goto Control Panel/Windows Firewall - click the "Allow a program or feature through Windows Firewall". Be sure to take note at which network you are connected to (Domain network, Home or work, public). before you go to the allow programs or features section. Make sure the check box to the left of CUPC & Cisco Unified Client Services Framework is checked and that the check box under the network you are connected to is checked to the right of the CSF.

Click OK and close the firewall window.

In CUPC click FILE/EXIT (don't just click the X to close the window this does not EXIT CUPC)

OPEN CUPC - give CUPC time to register

If this fixes your problem then your CALL menu option should NOT be grayed out and your should have a PHONE section in your server health.

I have a 9 part video series on configuring CUCM/CUPC & AD at the follow address

http://tinyurl.com/paulstryervids

Cheers

Paul

hamedadel · ‎02-28-2012

i'm facing same problem.

i followed the steps but it didn't worked, i even disabled the firewall totally, and also used pc at same network with CUCM but didn't work.

when i checked the "core.log" file it give me the following error in TFTP:

2012-02-28 12:55:55,356 INFO [provider-runner] [ConfigService] [TFTPConfigReader.getFile(138)] - TFTP getFile: mode=[SECURITY], hostname=[X.X.X.X], timeout(ms)=[9000], numAttempts=[2], isAscii=[false], file info:

localPath=[C:\Users\hamed.adel\AppData\Local\Cisco\Unified Communications\Client Services Framework\Config]

srcFilename=[CSFUSER3.cnf.xml]

destFilename=[CSFUSER3.cnf.xml]

useCachedDataOnFailure=[true]

2012-02-28 12:55:55,357 WARN [provider-runner] [ConfigService] [TFTPConfigReader.getBackupFileFromCurrentFile(387)] - No existing file to back up C:\Users\hamed.adel\AppData\Local\Cisco\Unified Communications\Client Services Framework\Config\CSFUSER3.cnf.xml

2012-02-28 12:55:55,358 INFO [provider-runner] [ConfigService] [TFTPConfigReader.getFile(175)] - Requesting [CSFUSER3.cnf.xml] from [196.2.192.222] to [C:\Users\hamed.adel\AppData\Local\Cisco\Unified Communications\Client Services Framework\Config\CSFUSER3.cnf.xml]

2012-02-28 12:56:13,359 ERROR [provider-runner] [ConfigService] [TFTPConfigReader.getFile(213)] - Error retrieving TFTP file [CSFUSER3.cnf.xml] from [196.2.192.222]: Connection timed out.

java.io.IOException: Connection timed out.

at org.apache.commons.net.tftp.TFTPClient.receiveFile(TFTPClient.java:173)

at org.apache.commons.net.tftp.TFTPClient.receiveFile(TFTPClient.java:339)

at com.cisco.uc.core.provider.tftp.TFTPConfigReader.getFile(TFTPConfigReader.java:177)

at com.cisco.uc.core.broker.config.CUCMConfigSubService.tftpFetch(CUCMConfigSubService.java:251)

at com.cisco.uc.core.broker.config.CUCMConfigSubService.fetchPhoneConfig(CUCMConfigSubService.java:648)

at com.cisco.uc.core.broker.config.ConfigServiceCoreImpl.fetchPhoneConfig(ConfigServiceCoreImpl.java:1059)

at com.cisco.uc.core.broker.phone.StartSoftPhoneHandler.handleEvent(StartSoftPhoneHandler.java:61)

at com.cisco.uc.core.sm.StateMachine.runEvent(StateMachine.java:279)

at com.cisco.uc.core.sm.StateMachine.runEvent(StateMachine.java:239)

at com.cisco.uc.core.provider.manager.ProviderController$ProviderRunner.run(ProviderController.java:336)

also below is the result of shell command "utils network capture port 69":

12:59:18.466103 IP Y.Y.Y.Y.60308 > CUCM.test.local.tftp: 27 RRQ "CTLSEPCS FUSER3.tlv" octet

12:59:24.473886 IP Y.Y.Y.Y.60309 > CUCM.test.local.tftp: 25 RRQ "CSFUSER3 .cnf.xml" octet

12:59:48.562920 IP Y.Y.Y.Y.50388 > CUCM.test.local.tftp: 27 RRQ "CTLSEPCS FUSER3.tlv" octet

12:59:54.568457 IP Y.Y.Y.Y.50389 > CUCM.test.local.tftp: 25 RRQ "CSFUSER3 .cnf.xml" octet

shalushar · ‎09-30-2011

Hi,

You are likely running into firewall issues so you may want to turn off your
security software on the system or tftp should not be blocked.

http://www.cisco.com/en/US/products/ps6837/products_tech_note09186a00808a2b0d.shtml

Tx,
Shalu

Christos Georgiadis · ‎02-28-2012

From the client PC just open a command prompt and type the following

tftp get -i get source CSFUSER3.cnf.xml

You should be able to download the config file.

If that doesn't work then this is not a CUPC problem but rather a connection problem.

As Shalu said if that fails disable the firewall and test again.

HTH

Christos

hamedadel · ‎02-28-2012

i tested this command and it didn't work the tftp it give me timeout.

as i mentioned i disabled the firewall, also i forget to said that i have cisco ip communicator on same pc and it is working good and get its configuration which mean there is no problem with connection.

also is there any way to download the .cnf.xml file without using tftp (http or https)?, also how i could be sure that the files exist (for example list them using shell command or anything else)?.

also it may be server side as it happen with me at all pcs, and networks.

hamedadel · ‎02-29-2012

also after i run "show network ipprefs all" command below was the result

Application IPProtocol PortValue HashLimit (max:rate) H-Status ConnLimit C-Status Type XlatedPort Status Description

ctftp udp 69 - - - disabled public - disabled TFTP access to CUCM TFTP Server

ctftp tcp 6970 2000:35/second enabled - disabled public - disabled HTTP access to CUCM TFTP Server

also from "os administration>tftp file management" i couldn't find any phone configuration files (.cnf.xml)

it seem that there is big problem with TFTP what should i do i need these urgent as it affect my deployment to CUCM