Forward only 4 digits !

[Jonn cos]

Hi all experts.

My setup is simple

(ext 1001) IPc1--------------------R1------------------------------------R2-------------------------IPc2 (ext 2001)

I have activated secondary dial tone feature and the digit is 9.

Now the destinaton-pattern on R1 is

destinaton-pattern 920..

But now, the call doesnt connect, when i ran the debug, it showed me that R1 is forwarding 92001 instead of 2001, which is logical. How can i force R1 to strip 9 and forward only 2001 ?

Do i have to use translation rules here ? is there any other method ?

[jmunoz19]

In the dial-peer, try using "forward-digits 4".  This will forward only the rightmost 4 digits.

[Jonn cos]

Dear Sir,

This command is for Pots dial peer only.

In my case i am only using voip dial peers

[Jaime Valencia · Accepted solution]

Just configure a translation rule to drop the 9

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk