FXO as direct line

Jonn cos · ‎08-06-2011

Hi all.

In CME, i have read the following

"Because FXO lines behave as private lines, users do not have to dial a prefix, such as 9 or 8, to reach an outside line"

this is taken from this link

How can i configure FXO to work as a direct line from CUCM ? any directions pls ? following is the simply topology

7940 ------------------- CUCM (7/8) -------H323------------------GW(2811)FXO-----------------Telco

How can i make button 1 of 7940 appear to be a direct line to user.

Kindly guide me

Jonn cos · ‎08-07-2011

Some one pls ??

Jonn cos · ‎08-08-2011

Anyone pls ?

Why no respones :-(

Rob Huffman · ‎08-09-2011

Hi John,

The config for these "Trunk" lines is shown here;

Cheers!

Rob

Jonn cos · ‎08-10-2011

Dear Rob,

You are always helpful, actually i was asking for CUCM not CME, is there any way to do the same with CUCM ?

Rob Huffman · ‎08-10-2011

Hey John,

Sorry my friend! It would help if I could read

This is not something I've configured. Here is a similar thread

but the user would still have to dial an access code;

Cheers!

Rob