12-12-2006 06:11 PM - last edited on 03-25-2019 09:23 PM by ciscomoderator
I have a centralised CCM and Unity set up. CCM is configured to run G729 to remote offices. Unity is version 4.2.1.
Can the Unity system support BOTH codecs at the same time - ie can local users use g711, but remote users use G729? Or if I convert to G729, will everyone use G729?
from the documentation I have read, it looks like I can choose G729, but from then on, everything will be recorded in G729.
thanks.....MS.
Solved! Go to Solution.
12-13-2006 12:28 AM
Hi, you're going able to use only one codec, you cant't use both at the same time if you're using only one Unity server. There is an interesting white paper at the CCO about the codecs with Unity at:
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_white_paper09186a00800875b7.shtml
Regards
Hope this helps, if so pls rate the post.
12-13-2006 12:28 AM
Hi, you're going able to use only one codec, you cant't use both at the same time if you're using only one Unity server. There is an interesting white paper at the CCO about the codecs with Unity at:
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_white_paper09186a00800875b7.shtml
Regards
Hope this helps, if so pls rate the post.
12-13-2006 01:12 PM
thanks for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide