09-23-2015 09:31 PM - edited 03-19-2019 10:08 AM
HI All
Could someone please tell me how to add/install the licenses for endusers in CUCM 9.x ?
Thanks all in advance !!!!
Solved! Go to Solution.
09-23-2015 09:43 PM
1) You will need to go to ELM>License Fulfillment>Generate license Request
2) Register your PAK on cisco website
3) Install the license in ELM
Refer to the below post some one had asked same question (although its version 10 and PLM - the procedure should be pretty much same.
https://supportforums.cisco.com/discussion/12608196/cisco-prime-license
-Terry
Please rate all helpful posts
09-23-2015 09:43 PM
1) You will need to go to ELM>License Fulfillment>Generate license Request
2) Register your PAK on cisco website
3) Install the license in ELM
Refer to the below post some one had asked same question (although its version 10 and PLM - the procedure should be pretty much same.
https://supportforums.cisco.com/discussion/12608196/cisco-prime-license
-Terry
Please rate all helpful posts
09-23-2015 10:05 PM
Hi Terry ... Thanks for your reply. the post id of a great help to me.
I just need to ask you one more question...... what if we have to instal/add licenses for 10 endusers only... will this way work ?
Regards
09-24-2015 12:16 AM
The process is same for any number of licenses you buy.
-Terry
Please rate all helpful posts
09-24-2015 02:27 AM
Thanks Terry !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide