how to integrate CCME 7.1 3945 router with siemens pbx server?

[Amit23]

Hello ALL,

Please help me to get the solution for this integration.

can i use voip dialpeer to intercommunicate with each ohter becasue all is same lan network?

i have siemens epbx with 100 users and ccme with 50 ip phones.

they are using digital phone with siemens epbx and ip phone with ccme router 3945.

i have pri line in epbx and fxo line in ccme router.

now i want to use both system in samy way so that any use can call anyone internally and also external by use of ccme fxo line and epbx pri line also.

please help me to provide your valuable points so that try it..

[skilambi]

See this guide

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns829/789914.pdf

You can have FXO/FXS between CCME and Siemens for bi directional calling although E1 is preferred to get caller ID and then QSIG for supplementary services

If you have issues that are specific to debugs/support, you may want to open a TAC case

Srini