cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
491
Views
0
Helpful
1
Replies

Learning CUCM

jbradmck1
Level 1
Level 1

How do I learn cisco unified communications?  I want to build a working system.  I have (4) 2811 routers and (4) 3750s.

I can purchase cisco phones.  Most of the documentation refers to "clouds" and broad level architecture.  Can I install cucm on 2 servers - (1) pub and (1) sub?

Is there a physical layer drawing available for setting up a system with (7) phones, wireless, with all servers and features?

Please assist.  I want to learn cisco unified communications.

1 Reply 1

Jaime Valencia
Cisco Employee
Cisco Employee

Yes, you can install CUCM on two servers assuming you have the SW and your servers are compatible.

The network diagram for a lab is pretty much what you want to build/test.

In mine I just have the servers and phones plugged into a 3560 and a 3524 which has a trunk between them.

Router on stick as I have UC apps on 10.x.x.x network and ip phones on 192.168.x.x

GWs also on 10 network and a few PRIs between them.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate