03-15-2016 03:50 PM - edited 03-19-2019 10:52 AM
I'm trying to use an ISR4331 as a voice gateway on CUCM, on the router I don't see the mgcp or ccm-manager commands. On the Cisco Feature Navigator I don't see an IOS that supports mgcp, is there one?
03-15-2016 04:04 PM
Have you enabled the UC9 feature license. You need to enable the UC license first. If you haven't refer here and activate the license:
http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html#pgfId-1192406
-Terry
Please rate all helpful posts
03-15-2016 09:23 PM
Hi,
Can u share the show version of router?
I was just checking the discussion and checking this IOS for MGCP in Feature Navigator and is supported.
https://supportforums.cisco.com/discussion/12723676/mgcp-e1-port-unregistered-status-ucm-105-even-status-ccm-manager-registered
http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp
regds,
aman
04-04-2016 11:07 AM
show version
Cisco IOS XE Software, Version 03.13.04.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S4, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Mon 05-Oct-15 11:24 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2015 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public Licens
Apr 4 18:04:26.405: %SYS-5-CONFIG_I: Configured from console by consolee ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
telcom1 uptime is 27 minutes
Uptime for this control processor is 28 minutes
System returned to ROM by reload at 04:01:36 UTC Wed Dec 30 2015
System restarted at 17:37:10 UTC Mon Apr 4 2016
System image file is "bootflash:/isr4300-universalk9.03.13.04.S.154-3.S4-ext.SPA.bin"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appx None None None
uc None None None
security None None None
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4331/K9 (1RU) processor with 1687137K/6147K bytes of memory.
Processor board ID FLM1953W0BV
3 Gigabit Ethernet interfaces
1 Channelized T1/PRI port
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
3223551K bytes of flash memory at bootflash:.
04-05-2016 02:28 AM
Hi,
I tried looking using feature navigator for the image which u have but result shows none as attached.
Further, I tried entering looking for the image on which MGCP is supported on 4331 but could not find using Feature Name as MGCP.
the image which u are using is isr4300-universalk9.03.13.04.S.154-3.S4-ext.SPA.bin has 04 but get only 3.13.0S
Suggest opening TAC case for help.
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide