06-04-2007 02:34 PM - edited 03-18-2019 07:25 PM
I'm having a problem with a fresh image of Unity. Windows will not let me add the Server to the domain. I have verified that there are no problems with AD by install Windows 2000 from CD and worked ok. Has anyone else had this problem?
06-04-2007 02:41 PM
There are only 2 instances when I've seen this happen.
1. When the new server is unable to resolve or contact the DC.
2. The account which is being used to add the server to the domain does not have Domain Admin rights or invalid login info was supplied.
Also, can you let us know what is the error message you get when you try to add ?
06-04-2007 04:09 PM
Based on the event logs from the DC it is contacting the server. The Windows 2000 server I built from an MS cd worked fine with the same credentials. Seems to be an issue with the Cisco Image of Windows 2000. One other issue I have noticed on the image is that you can't access the C$ or admin$ share on the DC.
I'm not at the office so I can't get the exact error. But i'll post it tomorrow.
06-04-2007 04:12 PM
Based on the event logs from the DC it is contacting the server. The Windows 2000 server I built from an MS cd worked fine with the same credentials. Seems to be an issue with the Cisco Image of Windows 2000. One other issue I have noticed on the image is that you can't access the C$ or admin$ share on the DC.
I'm not at the office so I can't get the exact error. But i'll post it tomorrow.
06-04-2007 04:28 PM
I VPN into a got the message, Here it is.
Security policies were propagated with warning. 0x534 : No mapping between account names and security IDs was done.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide