Nokia e75 and cisco CM.

[aakhilsameer]

Hi,

i have one new E75 Mobile,and i would liek to know whether i can connnect it to cisco call manager with intellisync software.

please helpme..

[pasimahone]

Hello,

No, not yet.

Support is for E75/E55/E52/E72 is in the roadmap.

-Pasi-

[valentin.gradinaru]

Hello,

are there any informations about Nokia E72 in order to interconenct it with CUCM v7 (intellisync software)?

[pasimahone]

Hello,

Here you go:

http://europe.nokia.com/get-support-and-software/download-software/nokia-call-connect-for-cisco/compatibility-and-download

New supported devices:

E52,E55,E72,E75

-Pasi-

[valentin.gradinaru]

i'll check today, thanks a lot

valentin

[valentin.gradinaru]

hello,

I've just installed Nokia_CC_Cisco_P6_2.0(1005).sis on Nokia E75, apply yhe license code, and everything works fine.

So, the new release from Nokia seems to work perfect.

CallManager System version: 7.0.2.20000-5

[take]

more or less the same problem but with a CME 7.1 or 8.0, the Nokia E75 with Nokia CC 2.0 does not register?, I did Assume to create the phone as a 7970 is this correct?

[pasimahone]

Hi,

2.0 client doesn't support CME.

-Pasi-

[take]

Hi,

I have it working, with CME 8.0 , install the lastest load for the 7970, did some changes in the nokia e75 configuration the cme conf is basically the same

[Yorick Petey]

Hi,

I am testing the new Nokia model E52 with Call Connect v2.0 and CUCM 6.1.

I am trying to register the phones using the 7970 model type like I did with older models.

I want to avoid the installation of the "nokia addon COP file" in my cluster because it will add a new phone model and will change some DB entries...

Does anybody find the way to register them using another phone model than the 7970?

Thank you.

Best regards,

Yorick

[pasimahone]

Hello,

Call Connect will first try registration as Nokia S60 and if CUCM rejects the registration then it will try as Cisco 7970.

-Pasi-