Phone Designer and Windows 7

[philipppe cuvillier]

Hi All,

4 years ago a discussion has been started and I do not see a solution.

Is there a new workaround ?

What can I tell to my customer ?

Regards

Philippe CUVILLIER

[Jaime Valencia]

The app has long been gone EOS, and is a couple weeks away from going end of support, your customer probably wants to look for an alternative, or to drop the idea of using it.

Table 1 Phone Designer Installation Requirements

Item	Description
Server/Network	Cisco Unified Communications Manager Release 6.0 or later1 Note Cisco Unified Communications Manager Release 8.5 or later is not supported. •The Cisco Unified Communications Manager server must be installed, configured, and operating correctly as described in the Cisco Unified Communications Manager documentation, at the following URL: http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html •The Cisco Unified Communications Manager server must be configured to support the Phone Designer application.
Client PC	Operating Systems: Microsoft Windows XP Professional, Microsoft Windows Vista Business Edition or Enterprise Edition Note Windows 7 is not supported. Note 64-bit operation is not supported. Disk Space: 80MB free hard disk space Recommended Monitor Resolution: 1024 x 768 pixels

[philipppe cuvillier]

Thanks for the info.

Which alternative can I use ?

The customer appreciate to customize his phones.

This tool is a good idea, this is a difference with the competitors alcatel and avaya

cisco needs to be different, the customer pay for this