04-12-2018 11:38 PM - edited 03-19-2019 01:17 PM
Hi,
I want to send partition name via a sip trunk from CUCM to another sip server. Is there any way to realize this scenario? Does sip normalization script provide this feature?
Basic flow : GW - > CUCM - > Sip Server
Thanks & Regards
04-13-2018 07:03 AM
Please explain what are your reseans to do that, maybe another solution will be better for your situation.
04-13-2018 07:20 AM
I want to use SIP message's attach data sending by GW to CUCM. But this attached data lost while passing through to the another sip server. This attached data contains data that depends on each GW's config.
I'm trying sip normalization scripts for this.
04-14-2018 06:11 AM
Why dont you combine CTI and/or AXL in sip server side?
04-16-2018 09:51 AM
As you said at the second message.
"
I want to use SIP message's attach data sending by GW to CUCM. But this attached data lost while passing through to the another sip server. This attached data contains data that depends on each GW's config.
I'm trying sip normalization scripts for this."
If your gateway is sending data using a non standard SIP Header, that header will no be passed through by default. You will have to enable it at CUCM.
Follow an example. It allows the header X-UserToUser to be sent to the next SIP Trunk.
M = {}
M.allowHeaders = {"X-UserToUser"}
function M.inbound_INVITE(msg)
local pt = msg:getPassThrough()
local body = msg:getHeader("X-UserToUser")
pt:addHeader("X-UserToUser", body)
end
return M
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide