cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
744
Views
0
Helpful
4
Replies

SMPP configuration

wongalan
Level 1
Level 1

I am trying to configure the SMS notification in the unified 4.0(4).

As my SMPP service provider required a specified source address, and I don't find where can set the source address (SOURCE_ADDR).

I have try to capture the SMS device log and find the "SOURCE_ADDR" is always blank.

Can anyone help me?

Thanks.

4 Replies 4

mrmccann
Cisco Employee
Cisco Employee

I believe source address is set on the SMS notification device page for a given subscriber. Putting in a value for the To: field should fill in SOURCE_ADDR.

This can be set either through CPCA or SA.

Yes, I think so but the To: field already have value and the SOURCE_ADDR still blank.

Actually, I have value in both from and to field however the SOURCE_ADDR still blank. I have try to capture the log as below:

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] Dictionary (03441230) {

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [ua_param] Integer 1729952 0x001A65A0

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SHORT_MESSAGE] Binary (28 bytes)

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SM_DEFAULT_MSG_ID] Char 0x00

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [DATA_CODING] Char 0x01

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [REPLACE_IF_PRESENT_FLAG] Char 0x01

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [REGISTERED_DELIVERY] Char 0x00

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [VALIDITY_PERIOD] String

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SCHEDULE_DELIVERY_TIME] String

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [PRIORITY_FLAG] Char 0x00

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [PROTOCOL_ID] Char 0x41

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [ESM_CLASS] Char 0x00

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [DESTINATION_ADDR] String 96385274

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [DEST_ADDR_NPI] Char 0x01

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [DEST_ADDR_TON] Char 0x01

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SOURCE_ADDR] String

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SOURCE_ADDR_NPI] Char 0x06

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SOURCE_ADDR_TON] Char 0x05

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SERVICE_TYPE] String

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [SEQUENCE_NUMBER] Long 64 0x00000040

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [COMMAND_STATUS] Long 0 0x00000000

15:15:34:230 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] [COMMAND_ID] Long 4 0x00000004

15:15:34:231 (AvDiagnostics_MC,642,Notifier,30) [Thread 1196] }

It seems we have overlooked this as a requirement for the implementation. I have submitted a defect against Unity for this issue - CSCeg70607.