cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3075
Views
0
Helpful
0
Replies

Tech Tip:How to add a suffix to the dialed number ?

deepaul
Level 1
Level 1

CUCM Translation pattern allows to prepend digits to the dialed number. To add a  suffix , the only option is to use translation rule on the gateway.The following  translation rule appends a 0 to the end of the dialed number.

voice  translation-rule 1
rule 1 /\(.*\)/ /\10/

Apply 'translate-outgoing  called 1 ' on the dial peer.

For information on translation rules, refer  the following urls.

Voice Translation Rules 
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml 

Number Translation using Voice Translation Profiles 
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

0 Replies 0